Civil Engineering Typical Drawings : Kerbs

-

image

Types of kerbs and their dimensions

Download Here

Comments

  1. Unknown2:45 PM

    M/s. SANDIP NANAVATI is involved in the execution of various Civil Engineers Project since 1988. Today, we operate in the areas of heavy industrial and Infrastructure projects like construction of Road, Sub-Station Building, Control Room, Bridge, industrial sheds, office buildings for hydropower industries, petrochemical hydrocarbon industries, Private Sectors and Multi National Companies.

    ReplyDelete
  2. William McCracken1:44 PM

    Finally I have found something which helped me.Appreciate it!
    Building Inspection

    ReplyDelete
  3. Anonymous3:46 AM

    smm panel
    Smm Panel
    iş ilanları
    İNSTAGRAM TAKİPÇİ SATIN AL
    hirdavatciburada.com
    beyazesyateknikservisi.com.tr
    servis
    JETON HİLESİ İNDİR

    ReplyDelete
  4. Anonymous7:57 PM

    tuzla beko klima servisi
    ümraniye alarko carrier klima servisi
    kartal daikin klima servisi
    kadıköy bosch klima servisi
    maltepe arçelik klima servisi
    pendik mitsubishi klima servisi
    ataşehir beko klima servisi
    maltepe lg klima servisi
    üsküdar daikin klima servisi

    ReplyDelete
  5. Hallebose4:12 AM

    Useful diagrams

    ReplyDelete

Post a Comment

Popular posts from this blog

Store Management

-
Store Management is an important aspect in a construction site. Material requirement should be calculated and the orders should be placed in advance so that material is readily available when work begins. The site stores in this site mainly manage receiving, issuing and storing of material and the maintenance of plant & equipments. Characteristics Of A Well Managed Store Availability of materials whenever required The storage quantity should neither be too much as it would increase the storage cost and the material may get deteriorated. On the other hand the stock levels should not be too low as a material shortage may lead to delays of the project. The optimum may vary from site to site, item to item or supplier to supplier. Yet it is a good practice to keep one week’s requirement in stock. Material should be stored in such a manner that they are easily accessible, not subjected to environmental damages and would not obstruct the site traffic. Using the FIFO basis in i...
Read more

ABC & ASPHALTING

-
Image
  Aggregate Base Course (ABC)   Normally construction of ABC shall be commenced after completing of Sub Base and the drainage works. Aggregate Base Course is a mixture of various sizes of aggregates and quarry dust in it. Normally aggregates of 37.5mm, 20mm, and 10mm… are included. In this project, the thickness of the ABC layer is 225mm. The motor grader is used to laying ABC. Normally the road has a cross fall of 3% from the centre the motor grader can be used to blade the road as required. After placing it shall be compacted well using the rollers and the compaction shall be tested. Degree of compaction should be 98% or more. Where (0-40 mm) ABC material has to be spread on a sub-base, the surface of sub-Base should be cleared from any extraneous matter. The ABC material was spread after checking all necessary testing like sieve analysis. After checking the underlying layer for damages or deficiencies, ABC material layer was spread in layers not exceeding ...
Read more

Field Density Test

-
Image
  The sand cone method is used for field density test in our highway construction. In the field, the dry density test is carried out for check the compaction of layers. Compaction is most useful for the preparation of sub base grade and other pavement layers and in construction of embankment in order to increase the stability and to decrease settlement. In field compaction, the compacting moisture content is first controlled at optimum moisture content and the adequacy of rolling or compaction is controlled by checking the dry density achieved and comparing with the maximum dry density. Base layer-98% Sub base layer-98% Type 1 layer-95% ABC layer-100% Road shoulder- 98% Field density test Testing procedure: The weight of empty sand cone is measured and then filled with dry sand and weighted. The soil excavated from the hole is collected and weighted. After weighting, a specimen of soil is taken to determine it water content. The sand cone is placed on...
Read more