Quality management methods

 

Quality Plan Processes

clip_image001

With Reference to the PDCA cycle as the basic concept of quality management system, that emphasizes the continuous improvement in quality towards zero defects through the processes of Plan, Do, Check and Action.

Quality Standards

ISO 9001 - Quality Management Standard

ISO 9001 is the internationally recognised standard for the quality management of businesses.

ISO 9001

applies to the processes that create and control the products and services an organisation supplies

prescribes systematic control of activities to ensure that the needs and expectations of customers are met

is designed and intended to apply to virtually any product or service, made by any process anywhere in the world

 

Quality tools

Some of the recommended tools and techniques that can be used in quality management include: kaizen, Six Sigma, Pareto charts, fishbone diagrams and hoshin kanri, in addition to 5S and total quality management process.

 

Responsibility Of Management

To provide a quality product and service at an affordable price and on time, in the execution of construction projects and in the manufacture of related products with the support of the suppliers and in total harmony with the society and the environment

Comments

  1. Timy TonsSeptember 22, 2018 at 6:41 PM

    I am curious to find out what blog system you’re working with? I’m experiencing some small security issues with my latest blog and I would like to find something more safeguarded. Do you have any suggestions? AMREP South Korea

    ReplyDelete
  2. Carol RobertsJune 8, 2020 at 7:44 PM

    Thanks for sharing this wonderful blog. I like your blogs.
    cheap car rental dubai monthly

    ReplyDelete
  3. Freedom SoftwareAugust 18, 2022 at 4:25 PM

    Your post is really good providing good information... I liked it and enjoyed reading it. Keep sharing such important posts. You might be looking for Quality control

    ReplyDelete

Post a Comment

Popular Posts

Field Density Test

Image
  The sand cone method is used for field density test in our highway construction. In the field, the dry density test is carried out for check the compaction of layers. Compaction is most useful for the preparation of sub base grade and other pavement layers and in construction of embankment in order to increase the stability and to decrease settlement. In field compaction, the compacting moisture content is first controlled at optimum moisture content and the adequacy of rolling or compaction is controlled by checking the dry density achieved and comparing with the maximum dry density. Base layer-98% Sub base layer-98% Type 1 layer-95% ABC layer-100% Road shoulder- 98% Field density test Testing procedure: The weight of empty sand cone is measured and then filled with dry sand and weighted. The soil excavated from the hole is collected and weighted. After weighting, a specimen of soil is taken to determine it water content. The sand cone is placed on...
Read more

METHOD OF INTERNAL & EXTERNAL PLASTERING ON BRICK WALLS & CONCRETE SURFACES

Method of Plastering. Internal plastering on surfaces of brick and concrete. External wall plastering. Soffit plastering / Soffit finishing with cement based easy plaster material and wall putty. Improving joint of brick walls & structural concrete joints. Internal Plastering on surfaces of Brick and Concrete. Surface where plastering is to be done will be cleaned. Level pegs on walls will be fixed with reference to the off lines to brick walls set out in floors. (Using centre plumb bob and nylon thread). All the brick walls will be watered before pasting mortar on walls. First coat mortar filling (1:4 Cement and Sand) upto 15 mm will be applied on surfaces where required mortar thickness exceed 25mm. Walls and columns will be plastered 1:4 Cement and Sand to achieve semi rough finished surface. Vertical joint of structural columns / walls & brick walls will be treated by fixing 200mm width chicken mesh with wire nails / concre...
Read more

Method of Plastering

Image
Method of Plastering Internal plastering on surfaces of brick and concrete. External wall plastering. Soffit plastering / Soffit finishing with cement based easy plaster material and wall putty. Improving joint of brick walls & structural concrete joints. Internal Plastering on surfaces of Brick and Concrete Surface where plastering is to be done will be cleaned. Level pegs on walls will be fixed with reference to the off lines to brick walls set out in floors. (Using centre plumb bob and nylon thread). All the brick walls will be watered before pasting mortar on walls. First coat mortar filling (1:4 Cement and Sand) up to 15 mm will be applied on surfaces where required mortar thickness exceed 25mm. Walls and columns will be plastered 1:4 Cement and Sand to achieve semi rough finished surface. Vertical joint of structural columns / walls & brick walls will be treated by fixing 200mm width chicken mesh with wire na...
Read more

CRACK TREATMENT OF THE ASPHALT BINDER COURSE

Image
  Main Break Water(MBW) access road occurs several cracks on the asphalt binder course. The road cracks are monitored and investigated with specialist from RDA Research & Development. This report describes the reason and remedial method of the cracks based on the investigation and consultation. MBW access road structure consists of fallowing cross section and the core samples have been taken on the cracks. According to core sample data, can be observed that the crack was started from CBM and reflected to the binder course surface. CRACK INVESTIGATION The crack survey carried out for the entire road and investigation detail summarized as an attached sheet. Core samples were taken from the jointly selected locations with the engineer. MBW access road cracks were categorized into two types based on crack surface appearance. Transverse cracks Longitudinal cracks ...
Read more

Survey & levelling

Image
    Preliminary work in road construction is surveying & leveling works. This consists of Traverse Survey, TBM Survey, and Centre Line Setting out, Centre Line marking, Cross Section Survey and Submittal of Drawings. Traverse Survey At the commencement of contract all the basic traverse points will be checked and if any are found to be missing or appear to have been disturbed, necessary arrangements should be made to re-establish the points and traverse survey is carried out after that. Establishing TBMS We did not use survey Department bench marks .The permanent concrete cube was selected to permanent bench mark. It height was assumed hundred meters. But this point is not sufficient for construction purposes. So reference to this point Temporary bench marks (TBM) should be established. TBMs are used to transfer reduce levels in road construction. Temporary bench marks should be established at the rate of four per km and also at or near all structures. When e...
Read more